Don't Call a Repairman - Call a Specialist
Its not always just about having your appliance repaired when you have a problem. Sometimes its also about understanding the issues, knowing how to take care of our appliances better on a day-to-day basis too.
For preventative maintenance tips or questions about your service call, please refer to the FAQs below or give us a call. We are happy to help you feel more comfortable and more knowledgeable any day or time.
- This is caused by using too much soap, the wrong soap, or both. Most washing machine manufacturers state that, depending on the water hardness, you should use approx. 1 tablespoon of regular strength soap, 1/2 of that if 2x concentrated, this of course is dependent upon how dirty/greasy your clothes are, but this is a guideline as a starting point.
- Also, it is recommended to keep the door open when not in use, though it doesn't have to be wide open, 4-6" would be sufficient unless it is more convenient to keep it fully opened. Prevention is always the best medicine, but if the problem has already started, there are some commercial products that you can use to get the smell out. We sell Washing Machine Magic and Affresh. Depending on how strong the odor is, it may take more than one treatment to completely remove the smell.
- The discoloration on the boot seal caused by the mold is usually permanent, though it will fade somewhat with the passage of time. Usually, the only way to remove it completely is to replace the boot, though this would be done for cosmetic reasons, as it rarely effects the performance of the part. They also suggest wiping the boot area dry when you have finished washing for the day, being sure to wipe off the glass, especially in the seal area, and inside the boot by carefully pulling it back while wiping it dry. Doing these things, along with using the Extra Rinse option each load, will go a long way in preventing Stinky Washer Syndrome.
Something has probably been pushed into the fan blade on the motor that cools the compressor. Roll the refrigerator out and remove the back panel. Look at the fan blade and see what is stuck in it. Most of the time it is a big dust ball or papers that have got sucked under the refrigerator. Just remove, reinstall back, and in a couple of hour the refrigerator will cool down again once the fan removes the extra heat.
You need to consider both the quality of appliance you can afford as a replacement and the option of having your existing appliance properly repaired by a competent professional. We can diagnose and evaluate your appliance in order to determine if it is in your best interest to repair or replace the unit and advise you accordingly.
If you were to replace your existing appliance with one that costs about what you paid a decade ago, you'll be repairing or junking the new machine every three to four years. Inevitably you will have to pay more up front for a new, high-quality machine that will give you another 10 years of trouble-free operation or you pay less up front for a low-end machine and then pay-as-you-go for repairs or replacement units.